• Blog posts

    Bio

    By John Flanagan

    Revit_2020___Stacked_Wall_Alignment_-_1.JPG

    Stacked Wall Alignment

    When creating masonry stacked walls you need to make sure that the blockwork and brickwork etc are properly aligned. In the illustration below the stacked brick and block walls on the left do not align. This is fixed by changing the Offset from Wall Centreline to Core Face Exterior – right illustration. The wall layers now line through.

    Stacked Wall Assembly – Not Aligned

    Revit_2020___Stacked_Wall_Alignment_-_2.JPG

    Stacked Wall Assembly – Aligned

    Revit_2020___Stacked_Wall_Alignment_-_3.JPG

    To get stacked walls to align you will sometimes need to use the offset tool in the Edit Wall Assembly dialogue box.

    Edit Wall Assembly

    Revit_2020___Stacked_Wall_Alignment_-_4.JPG

    View my previous blog on Stacked Wall Creation https://www.cadlinecommunity.co.uk/hc/en-us/articles/360003479498-Revit-2020-Stacked-Walls