• Blog posts

    Bio

    by Justin Doughty

    Recently I was asked how to produce 3D DGN files directly in Revit 2014. Initially I assumed this would be enabled as default, however after further investigation, editing of the Revit.ini file is required.

    This is actually detailed within the Revit Help Files:

      

      

    To enable this, the Revit.ini file is located in the following location:

    C:\Users\<username>\AppData\Roaming\Autodesk\Revit\<product name and release>

    Use the following Autodesk guide to add the options to the file:

    Export Settings in Revit.ini

    You should now have something like below:

    Setting this to 1 will then enable Revit to Output 3D DGN files.