• Blog posts

    Bio

    By Miles Nicholson

    AutoCAD Electrical 2024 – Flip Wire Number - Wire Colour Gauge - 1.gif

    The Flip Wire Number command moves a selected wire number to the same position on the other side of the wire. This also works for wire colour/gauge labels where the wire colour/gauge label is aligned to the wire.
    Select Schematic ribbon tab > Edit Wires/Wire Numbers pane > AutoCAD Electrical 2024 – Flip Wire Number - Wire Colour Gauge - 2.pngFlip Wire Number

    Select each wire number to flip.

    AutoCAD Electrical 2024 – Flip Wire Number - Wire Colour Gauge - 3.png

    Each wire number or wire colour/gauge label selected is mirrored across its associated wire.
    If a wire colour/gauge label has used the “|” symbol where the text is split across 2 lines, the whole text is flipped either above or below the wire.