• Blog posts

    Bio

    By Miles Nicholson 

    In a schematic, you may have wires connecting between multiple terminals that represent a bridge between terminals. In actual reality, you probably would only connect one wire into the first terminal and then jumper the remaining terminals using a bridging link.

     1.png

     

    This requirement can be achieved by editing the terminal strip properties.
    In the terminal editor, automatic bridge creation will create the required bridging links:

     2.png

    3.JPG

    This basically means the wires that represent the bridges are now not shown in the terminal strip drawing.

    4.png

Comments

0 comments

Please sign in to leave a comment.